Cyclades AlterPath OnBoard Guia de Instalação descarregar pdf (Página 49)

Installation 33

6.Enabling Access to the Web Manager

1. Using either a terminal or a terminal emulation program installed on a

computer that is connected to the OnBoard, start a session with the

following console port settings:

2. Log into the console port as root.

The default password is “cyclades.”

Caution: For security, it is essential for root to change the root password.

3. Enter the passwd command, and enter and confirm a new password

when prompted.

4. Invoke the cycli utility.

5. Make sure the primary Ethernet interface (eth0) is active.

Note: Alternately, you can enter all the set network interface

eth0 parameters in Step 5 through Step 10 in a single cycli

command line.

Table 2-4: Terminal Session Settings for Console Port Access

Serial Speed: 9600 bps Parity: None Flow Control: None

Data Length: 8 bits Stop Bits: 1 ANSI emulation

OnBoard login: root

Password: cyclades

[root@OnBoard /root]#

[root@OnBoard /root]# passwd

[root@OnBoard /root]# cycli

cli>

cli> set network interface eth0 active yes

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 103 104

Sem comentários

Cyclades AlterPath OnBoard Guia de Instalação Página 49