Cyclades AlterPath OnBoard Informações Técnicas descarregar pdf (Página 423)

100

101

Appendix A: Advanced Device Configuration 383

Address Configuration for Connected Devices

As shown in the example output from the ifconfig command on the

OnBoard in the following figure, both private subnet names are assigned as

aliases to the priv0 interface, and the OnBoard-side IP addresses and subnet

masks from Figure A-7 are assigned to the each alias.:

Figure A-8: ifconfig Output With priv0 Aliases for Two Private

Subnets

The configuration of the devices shown in Figure A-6 is described in the

following bulleted list:

• “sp1” is on private subnet “sub1,” so it needs an IP address in the range

192.168.1—192.168.1.255: 192.168.1.2.

• “sp2” is also on private subnet “sub1,” so its IP address in the same range:

192.168.1.3.

• “sp3” is on private subnet “sub2.” It has previously been assigned the IP

address 192.168.4.21, which cannot be changed.

• “sp4” is also on private subnet “sub2.” It has previously been assigned IP

address 192.168.4.22 and its address cannot be changed either.

The following figure shows the values specified on the Web Manager

Config → Devices: Add new devices dialog to specify the private subnet,

and the device IP for “sp1,”, “sp2,” “sp3,” and “sp4.”

priv0:sub1 Link encap:Ethernet HWaddr 00:60:2E:BB:AA:AA

inet addr:192.168.1.1 Bcast:192.168.0.255

Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

Base address:0xe000

priv0:sub2 Link encap:Ethernet HWaddr 00:60:2E:BB:AA:AA

inet addr:192.168.4.1 Bcast:172.10.0.255

Mask:255.255.252.0

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

Base address:0xe000

1 2 ... 418 419 420 421 422 423 424 425 426 427 428 ... 501 502

Comentários a estes Manuais

Sem comentários

Cyclades AlterPath OnBoard Informações Técnicas Página 423

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cyclades AlterPath OnBoard